Application Fields
For restoration workings in structures,
For obtaining of smooth surface before painting, ceramic coating, insulation,
For filling of fine cracks,
For repairing of damaged surfaces such as spilled, caved, broken, detached concrete, plaster, etc.,
On brut concrete, prefabric concrete, masonary, briquet, brick surfaces,
Application space of 1-5 mm.

Tecnichal Features
Aspect: Grey coloured powder
Application Temperature: +5 ºC / +35 ºC
Mixture Rate: 5,5-6 lt water / 25 kg powder
Pot Life: 25 minutes
Setting Period: 1- 1,5 hours
Period to take use: After 6 hours
Consumption: Average 1,5-2 kg/m² (for thickness of 1 mm)
Package: 25 kg. craft bag
Shelf Life: In its unopened package in dry environment 12 months
Test Results
Pressing resistance: > 11 N/mm²
Breaking resistance: > 4 N/mm²
Adhesion resistance: > 0,5 N/mm²

Application Guideline
Remove the residues that will prevent to be adhered.
Pay attention that the surface is strong and had been cured.
Humid the surface before the application or coat with Kalekim Astar to take a better result.
Mix it until there will not be any lump as pouring 25 kg. powder mortar over the 5,5-6 lt. water slowly(Use of low cyclical mixer is recommended for mixture.)
Rest the mortar for maturation for 5-10 minutes, mix it again before you start to apply.
Fill the detached, cracked, broken areas on ground with the trowel rather well.
It can be applied at thickness of 1-5 mm.
Polish the surface with a humid sponge.
Consume the prepaired mortar in 25 minutes. Dispose the old mortar.
After application, the humidening of surface from time to time in 24 hours is recommended.

Warnings
Do not breathe its powder because of its is cement based, do not make it contact with skin and eye.
Do not add any admixtures that were not determined in the application guideline.
Store it in the dry environment with maximum 10 coat storings.
Above values had been given for 23 °C ± 2 temperature and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.