

Home	Plasters and Final Decorative Coatings	Paints	Construction Chemicals	Russian

8251 SeraCare Surface Protector

Surface protector material that protects as spreading to the surface, without forming film layer, does not prevent to breath at micro level.
Prevents blooming in the application zone.

Application Fields
To make the coating materials and joints resistant against to getting dirty and algeas with favor of its water repulsiveness feature,
To increase the resistance to water and easing of next cleaning works,
On terracotta, clinker, ceramic, granite ceramic, brick surfaces that are absorbent at little and medium degrees,
On the floors that are exposed to high humidity,
For protection of the coating materials as being applied before the joint application and obtaining of easy cleaning of dirts that will be able to occur.

Tecnichal Features
Aspect: Transperant liquid
Application Temperature: +5 ºC / +35 ºC
Consumption: Average 10-15 lt/100 m²
(changes according to the material's type and absorbency.)
Package: 1 lt. plastic tin
Shelf Life: In its unopened package in dry environment 12 months

Application Guideline
The surface must be cleaned with the products of Kalekim SeraCare and completely dry.
Spread the Surface protector Material of SeraCare with a flat brush or sponge without pressing much (just with the brush's weight), always in the same way, equally to everywhere and leave it to dry.
Apply as two coats for the external space applications. Wait for 24 hours between the coats.
The applied surface is used after 24 hours.
Apply as spraying to the vertical brick surfaces.
Repeat the application for 2-3 times a year depending on the wearing condition of the surface. Clean the surface with the suitable one of the products of Kalekim SeraCare for each repeated application. Apply the Surface Protector of SeraCare as completely rinsing the cleaned surface with much water after it completely dried.
Pay attention for the product not to spread into the joint spaces during the applications that will be made before the joint filling work.

Warnings
The application surface must definitely be dry.
Do not mix with water, it is ready to use.
Attention! The product includes flammable chemicals.