

Home	Plasters and Final Decorative Coatings	Paints	Construction Chemicals	Russian

8202 SeraCare Stain Remover

Nonacidic cleaning material that includes admixtures that are recycling to the nature as 90 %, for dirt and oily spots.

Application Fields
For easily cleaning of the coating materials that had been dirty with oily spots and joints,
" For difficult spots that will be able to occur on the coating surface such as spirits-soft drinks, coffee, oil, ink, shoe polish, nicotine, lipstick, rust, gas pen.
On the polished-nonpolished surfaces, on the coating stones that are not resistant to acid, granite, normal and rustic ceramic, porcelain ceramic, cotto, clinker.

Technical Features
Aspect: Transperent liquid
Application Temperature: +5 ºC / +35 ºC
Mixture Rate: Spot Remover/ Water 1/5 - 1/10
Consumption: Average 3-5 lt / 100 m² (without mixing water)
Package: 1 lt. plastic tic
Shelf Life: In its unopened package in dry environment 12 months

Application Guideline
Depending on the spot quantity and density, it can be mixed with water at rate of 1/5 or 1/10. Cleaning with the Cement Remover of SeraCare that had been mixed with water at these rates, can be made with two methods:

Cleaning with hand:
Spread the the Cement remover of SeraCare to approximate 2 m² part of the area that will be cleaned, with the brush.
Start cleaning as rubbing with a cloth after waiting for 2-3 minutes.
Take the dirty water on the ground into a bucket with the sponge. Often wash the cloth and sponge with clean water.
Again apply the Cement Remover of SeraCare that was prepaired as mixing less water onto the areas where the dirts can not be removed after the cleaning was finished.
Rub out the whole area as rinsing with much water and leave to dry.
Use the Cement Remover of SeraCare without mixing water and as leaving on the surface for the longer time for the cleaning of sticky fragments.

With rub and wet / dry vacuum machine:
Spread the Cement Remover of SeraCare to approximate 4 m² part of the area that will be cleaned, with the brush.
Start cleaning with the scrup machine that a hard washing cloth had been accomodated under it after waiting for 2-3 minutes.
Take the dirty water on the ground with the vacuum machine.
Clean whole area like this and again apply the Cement Remover of SeraCare that was prepaired as mixing less water, to the areas where the dirts were not removed after cleaning was finished.
Take with vacuum as rinsing the whole area with much water and leave to dry.

Warnings
Use it as shaking.
Use the product as wearing glove and do not make it contact with the skin directly.