

Home	Plasters and Final Decorative Coatings	Paints	Construction Chemicals	Russian

8201 SeraCare Cement Remover

The cleaning material that includes nonionic surface active substances and admixtures that are recycling to the nature as 90 %.

Application Fields
After application, for easily cleaning of mortar fragments and cement based all construction refues that are on the coating material and joints,
On terracotta, clinker, rustic spreading, mantel shelves, natural stones, granite ceramic, porcelain ceramic, vitreous ceramics,

Tecnichal Features
Aspect: transparent liquid
Application Temperature: +5 ºC / +35 ºC
Mixture Rate: Cement Remover / Water, 1/5 - 1/10
Consumption: Average 1 lt /100 m² (as diluting with water at rate of 1/5)
Package: 1 lt. plastic tin
Shelf Life: In its unopened package in dry environment 12 months

Application Guideline
Depending on the fragment quantity, it can be mixed with water at rate of 1/5 or 1/10. Cleaning with the Cement Remover of SeraCare that had been mixed with water at these rates, can be made with two methods:

Cleaning with Hand:
Spread the the Cement remover of SeraCare to approximate 2 m² part of the area that will be cleaned, with the brush.
Start cleaning as rubbing with a cloth after waiting for 2-3 minutes.
Take the dirty water on the ground into a bucket with the sponge. Often wash the cloth and sponge with clean water.
Again apply the Cement Remover of SeraCare that was prepaired as mixing less water onto the areas where the dirts can not be removed after the cleaning was finished.
Rub out the whole area as rinsing with much water and leave to dry.
Use the Cement Remover of SeraCare without mixing water and as leaving on the surface for the longer time for the cleaning of sticky fragments.

With rub and wet / dry vacuum machine:
Spread the Cement Remover of SeraCare to approximate 4 m² part of the area that will be cleaned, with the brush.
Start cleaning with the scrup machine that a hard washing cloth had been accomodated under it after waiting for 2-3 minutes.
Take the dirty water on the ground with the vacuum machine.
Clean whole area like this and again apply the Cement Remover of SeraCare that was prepaired as mixing less water, to the areas where the dirts were not removed after cleaning was finished.
Take with the vaccum as rinsing the whole area with water and leave to dry.

Warnings
Use the product as wearing glove and do not make it contact with skin directly.
Damages the polished and glossy surface.
Do not use on the gritty marbles and the coating materials that are not resistant to the acid.
Not used in oil cleaning work.
Test the surface before using it on the application surfaces.