Application Fields
In spaces that are required to be ready for use in one day,
In the Internal and external environments,
On the surfaces such as concrete, mortar, covering,
For adhesion of the coating materials such as ground and wall ceramic, granite, natural stone, etc.,
For the ceramic coatings on the old ceramics.

Technical Features
Aspect: Grey coloured powder
Application Temperature: +5 ºC / +35 ºC
Mixture Rate: 6-7 lt water / 25 kg powder
Pot Life: 45 minutes
Joint Filling Period: On wall 4 hours, On ground after 6 hours
Consumption: Average 4 - 5 kg / m²
Package: 25 kg. craft bag
Shelf Life: In its unopened package in dry environment 12 months
Flexibility: Medium
Open Waiting Period Straining Adhesion Resistance:
At least after 10 min. > 0.5 N/mm² (EN 1346)
Slipping: < 0.5 mm (EN 1308)
Adhesion Resitance: > 1 N/mm² (EN 1348)
Early Straining Adhesion Resistance:
Maximum after 24 hours > 0,5 N/mm² (EN 1348)

Application Direction
Pay attention that the surface had been cured and strong.
Remove the residues that will prevent to adhere on the surface.
If there are defects on the application surface, straighten them with the TamirArt and Mastar 10.
Mix it until there will not be any lump as pouring 25 kg. powder mortar over the 6-7 lt. water slowly .(Use of low cyclical mixer is recommended for mixture.)
Rest the mortar for maturation for 5 minutes, mix it again before you start to apply.
Rake the mortar with a notched raked trowel that is suitable to the floor tile as spreading it on the surface. (See: Table of Notch Sizes).
Adhere the floor tiles on the mortar that has been raked in 15 minutes. (Rake it on the enough surface as confacering that it is a fast setting product.)
Consume the prepaired mortar in 45 minutes.
Dispose the old and formed rind mortar.
You could start to the joint filling work on wall after 4 hours, on ground after 6 hours. Use the FugaFlex as the joint filler. You could open your space to use in 1 day
The use of combined adhesion method is reccommended for the ceramic applications on ceramic, in admixture for applications of 60x60 cm. ve bigger dimensonal coating materials.

Warnings
Do not breathe the powder because of its is cement based, do not make it contact with skin and eye.
Do not add any admixtures that were not determined in the application guideline.
Store it in the dry environment with maximum 10 coat storings.
Above values had been given for 23 °C ± 2 and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.