Application Fields
For the ceramic coating on the old ceramic, mosaic, marble,
For adhesion of tiles on the Plasterpanel, plaster coat and painted grounds,
For adhesions of the insulation plates such as Polystyrene, foamboard foam,
In the internal spaces,
On the surfaces such as concrete, plaster, covering.

Technical Features
Aspect: White coloured fold
Application Temperature: +5 ºC / +35 ºC
Joint filling period: 1-2 days
Consumption: Average 1,5-2 kg / m²
Package: 1,5 and 5 kg. plastic bucket
Shelf Life: In its unopened package in dry environment 6 months
Flexibility: Very well
Open Waiting Period Straining Adhesion Resistance:
At least after 30 min. > 0.5 N/mm² (EN 1346)
Slipping: < 0.5 mm (EN 1308)
Adhesion Resistance: > 1 N/mm² (EN 1348)
 

Application Guideline
Remove the residues that will prevent to adhere on the surface.
If there are any broken, cracked and defective areas before the ceramic application on ceramic, repair them with the TamirArt.
It is a product ready to use. Mix it befor starting to the application.
Rake the mortar with a notched raked trowel that is suitable to the floor tile as spreading it on the surface. (See: Table of Notch Sizes).
Adhere the ceramics on the product that has been raked in 20 minutes at least.
At first coat the surface with the Coat of Kalekim for the application on the plaster and painted ground. (Control the strenght of the dye while applying it on the painted grounds, scrape the swelled parts.)
The flat and coatar applications can be made for the adhesion of the insulation plates
Close the package tightly when not in use.
Use the Adhesion Mortar of GraniTech for applications with the floor tiles that have low absortion of water such as granite.
The product drying period can go up 1 week for the ceramic application on the old ceramic.

Warnings
Close the package rather well when not in use because of the product is toughened by contact with air.
Do not add any admixture that was not determined in the application guideline.
Store it between 5 °C - 23 °C, as it will not be exposed to the sun light directly.
Above values had been given for 23 °C ± 2 temperature and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.