Tecnichal Features
Aspect: Dark Brown while in its package, black after it dried.
Density: 0,98 gr/cm3
Solid material rate: % 46
Mixture Rate: IzoCoat Coat / Water : 5 / 1 - 4 / 1
Softening Temperature: +70 ºC
Application Temperature: +5 ºC/+ 35 ºC
Drying Period: 1 hour
Fully Drying Period: 5-6 hours
Consumption: 400 gr/m²
Package: 17 kg (net)
Shelf Life: In its unopened package in dry environment 24 months

Application Guideline
Pay attention that the surface had been cured and is strong.
Carve the soft parts as purifying from dust, dirt, oil that will prevent the ground's adhesion.
Apply the (Coat of) İzoCoat Astar as cold.
Mix rahter well as adding water at rate of approximate 20-25% to İzocoat Astar.
Apply to the surface with the brush or roll.
Preferably aplly for two coats. Do not spread other coat before one coat completely dried.
The membrane application of İzoCoat must not be made before the coat dried.

Warnings
Do not make it contact with eye and skin.
Do not make any application in the rainy weathers.
Avoid freezing.
Clean the tools with soapy water immediately after the application and with the industry type removers after they dried.
Store the product in areas where does not have sunlight and as they will be maximum 5 units together.
Above values had been given for 23 °C ± 2 temperature and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.