Home  Plasters and Final Decorative Coatings  Paints Construction Chemicals  Russian
 

2600 FUGAFLEX GROUTING MORTAR (6-20mm)

 

 
Cement based, single componented flexible joint filling material that obtains smooth surface, includes the chemical admixtures that increase the product's performance, workability, cracking resistance, water impermeability and colour permenance.
Ready to use with its rich colour selection.
Resistant against paling, does not crack and the dye do not vomit.
Its water impermeability and flexibility are high.
With Rustic aspect
Obtains the space be used quickly as toughing fast.
TSEK and EN 13888 certificated

Application Fields
Specially in the joint spaces of the materials such as ceramic with rustic aspect, granite ceramic, natural granite, big dimensional ceramic, cotto, clinker, between 6-20 mm.,
On the grounds where there are many pedestrians and load traffic,
In the spaces where there are sudden temperature changes,
In the internal and external environments,

Tecnichal Features
Aspect: White and colourfull coarse powder
Application Temperature: +5 ºC / +35 ºC
Mixture Rate: 4-4,4 lt water / 20 kg powder, 1-1,1 lt water / 5 kg powder
Pot Life: 1 hour
Period to take use: On wall 6 hours, On ground after 12 hours
Consumption:
See. Consumption table
Package: 20 and 25 kg. craft bag; 5 kg. polyethilene bag
Shelft Life: In its unopened package in dry environment 12 months
Test Results
Breaking resistance: > 5 N/mm²
Pressing resistance: > 15 N/mm²
Flexibility: Good

Application Guideline
Remove the residues that will prevent to be clinged on the joint spaces and mositure.
Mix it until there will not be any lump as pouring 20 kg. powder mortar over the 4-4,4 liters water slowly .(Use of low cyclical mixer is recommended for mixture.)
Rest the mortar for maturation for 10 minutes, mix it again before you start to apply.
Fill the mortar into the joint spaces with a rubber trowel with crosswise actions as spreading it on the surface and take the residuces as grazing
Clean the surface with a humid sponge after 15-20 minutes.
Polish the surface as cleaning with a dry cloth after it dried.
Consume the prepaired mortar in 1 hour. Dispose the old mortar.
Pay attention to the water rate that will be added into the powder mortar, avoid from application in emulsion form. Application in emulsion form will cause to the crackings, collapses, easy abrasions, chalkings and colour defects.
The space can be started be used in 6-12 hours after the joint application.

Warnings
Do not breathe the powder because of its is cement based, do not make it contact with skin and eye.
Do not add any admixtures that were not determined in the application guideline.
Store the craft baged product in the dry environment with maximum 10 coat storings.
Above values had been given for 23 °C ± 2 temperature and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.

 

www.onlinesigarayason.com