Application Fields
For insulations of terraces and bitched or smooth roofs that are covered with concrete, liquid, cement plate, galvanization, zinc, aluminium, PVC, polyester,
wood.
For external insulations of the north faces of the building.
For insulation of cracks, fringe, chimney's bases and other details.

Technical Features
Aspect: White coloured liquid
Application Temperature: +5 ºC / +35 ºC
Waiting period amont layers: 4 hours (20 ºC'de)
Period to take use: 1 week
Consumption: Average 1,5 kg / m² (for thickness of 1 mm)
Application (On vertical surface):
Layer number 2 / Total thickness 0,75 - 1 mm
Application (On horizontal surface):
Layer number 3 / Total thickness 1 - 1,5 mm
Package: Plastic tin as 3,10 and 20 kg
Shelf Life: In its unopened package in dry environment 12 months
Flexibility: Very well

Application Guideline
Remove the soft layer that decreases the adherence, the dust, dirt and oil on the application surface. Strengthening of the surface is recommended as pouring covering on the surfaces that their chalkings can not be prevented.
Pay attention that the surface is strong and had been cured.
If there are any defects and cracks on the application surface, strenghthen them with TamirArt, KaleMastik or Elastikor that had been formed as mastic as mixing with fine sand at rate of 1/3.
Spread Elastikor that had been diluted with water at rate of ¼ to the surface as the coat layer before the application.
Mix the insulation material, apply it with a brush or roll for 3 layers horizontally; 2 layers vertically. Wait for 4 hours depending of the temperature among the layers.
Keep the package closed when the application was given a break.
Apply the Elsticor together with the insulation netting for strengheting of the wide surfaces, bridging of the joint spaces and cracks such as parapet corners, lights, chimney's bases. Make this work after the coat layer application.
Cover the surfaces that are exposed to the pedestrian and load traffic, with the protective materials such as covering, ceramic.

Warnings
Wash with much water in case contact with eye.
Do not add any admixtures into the product.
Avoid the product be frozen
Above values had been given for 23 °C ± 2 and %50 ±5 humid environment conditions. These values may change according to the environmental conditions.