Application Fields
Workes of cellular mineral structure elements such as concrete, mastory, cement plate, traverten, brick, limy plaster, roofing tiles that require water impermeability,
Lining of the mineral surfaces where the dye and plaster will be applied,
The workes of the surfaces that are covered with every kind of dyes and plasters that have low water resistance.

Tecnichal Features
Aspect: Yellow-orange coloured viscosity liquid
Application Temperature: +0 ºC / +35 ºC
Consumption: Average 20-50 g/m²
(changes according to the surface's porosity)
Package: 1 lt. plastic tin
Shelf Life: In its unopened package in dry environment 12 months

Application Guideline
Remove the dust, dirt and oil on the surface.
Dilute the Durex with clean water at rate of 1/14 if it will be used as coat, with rate of 1/9 if it will be used as the work material. Thus, mix it as adding Durex into the water.
Prepaire necessary quantity mixture because of the diluted material has to be consumed in the same day.
Apply the Durex that has been prepaired like this, to the surface with a brush, roll or spray gun as before 2-3 layers. (Little structure elements can be worked with the layering tecnique.)
Start to the second layer application while the surface is still wet, without no waiting period between the layers.
Do not make any application under sun and at temperature under 0 °C.
If a coating material will be applied on Durex, wait for 1 day after application.

Warnings
Store the product in a clean and dry space, at temperature over 0 °C and as it will not be exposed to the sun directly.